Compile Bitcoin on Ubuntu 14.04 · GitHub

What is the stable version?

I just compiled bitcoin cash from source, version 0.21.11, and it when I do getblockchaininfo I get the warning:
"warnings": "This is a pre-release test build - use at your own risk - do not use for mining or merchant applications"
So I tried with 0.21.10, 0.21.9, and even 0.21.8. They all give the same warning!
Here's what I did (on Ubuntu 20.04):
apt-get update
apt-get upgrade -y
apt-get install libboost-system-dev libboost-filesystem-dev libboost-chrono-dev libboost-test-dev libboost-thread-dev git bsdmainutils build-essential libssl-dev libevent-dev ninja-build python3 cmake libjemalloc-dev libminiupnpc-dev libdb-dev libdb++-dev libzmq3-dev -y
git clone https://github.com/Bitcoin-ABC/bitcoin-abc --branch v0.21.11 --single-branch
(cd bitcoin-abc && mkdir build && cd build && cmake -GNinja -DBUILD_BITCOIN_QT=OFF .. && ninja && strip src/bitcoind && strip src/bitcoin-cli && strip src/bitcoin-tx && ninja install)
What am I doing wrong? I am planning on mining so I am concerned by this warning.
submitted by bithire to Bitcoincash [link] [comments]

Make your own stakebox. Ultimate beginners guide how to compile any wallet on AARCH64 (Raspbery pi and other SBC)

I contemplated to wrote this for a long time, so it's finally time.
As you know a lot of altcoins uses PoS (Proof-of-stake) way of "mining" coins. Which basically means, that you hold coins on your unlocked wallet and you are receiving stakes as a reward. This requires very little power and it can bring you a lot of rewards, at just 10W from the wall.
So first I am using latest Raspbian on RPI4B 4GB in this example.Setting up Raspbian is not part of this process since it's very well documented. I recommend to change user from pi to something else due to security concerns and you can also do other stuff just search "security Raspberry PI" and you find a lot of articles, but this is not the focus of this guide.
I know there are a lot of guides on the internet, but I am using like 5 sources, so it's compiled what other people wrote and some of my research.
I am using AnyDesk insted of SSH or VNC server, because it works it's ligthweit and it just works.
So after you see the gui of Raspbian, just launch terminal (CTRL + ALT + T) and do basic thing:
sudo apt-get update && sudo apt-get upgrade
Than press Y and let it run, after is finished, we need to prepare so dependency packages. Since most of the wallets using Berkeley DB 4.8 we need to obtain it.
So in terminal wrote:
cd cd Downloads wget http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz tar -xzvf db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-cxx make sudo make install 
So wait unti it's finished and than you can delete files in Downloads folder in gui or use:
sudo rm -r [folder] 
So next thing we need to install some libraries.
sudo apt-get install git build-essential libtool autotools-dev autoconf pkg-config libssl-dev libcrypto++-dev libevent-dev libminiupnpc-dev libgmp-dev libboost-all-dev devscripts libdb++-dev libsodium-dev 
And pres y and let it run. After that another set of libraries:
sudo apt-get install libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools libprotobuf-dev protobuf-compiler libcrypto++- dev libminiupnpc-dev qt5-default 
And then again pres y and let it run. Some wallets need older version of libssl1.0-dev, so for for safe compiling we install that as well:
sudo apt-get install libssl1.0-dev 
Pres y and let it run. Warning don't use sudo-apt get autoremove, since it would wipe this package, since it's old.
Next thing we are going to obtain Bitcoin PPA filest, which can be done like this.
cd /etc/apt/sources.list.d/ sudo nano bitcoin.list 
Paste this in there:
deb-src http://ppa.launchpad.net/bitcoin/bitcoin/ubuntu artful main 
And CTRL+X and than y, then do this:
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv C70EF1F0305A1ADB9986DBD8D46F45428842CE5E sudo apt-get update 
So now we are ready for compiling. So we are going create folders. CD yourself where this folder should be situated, if you for example have plugged in some external drive. Then:
mkdir Crypto cd Crypto 
And then we have to choose wallet which you want to compile. I am choosing Streamies (STRMS) as an example, since it's pretty good coin for staking. So:
mkdir Streamies cd Streamies 
Then go to the github page and click on the green button on the left and click copy to clipboard, which gives you git link.
git clone https://github.com/Streamies/Streamies.git 
Watch the output folder which it creates, it's stated in the first two lines and copy then by highliting the text and CTRL+SHIFT+C copy it to your clipboard.
cd Streamies (this is that git created folder) ./autogen.sh ./configure CPPFLAGS="-I/uslocal/BerkeleyDB.4.8/include -O2" LDFLAGS="-L/uslocal/BerkeleyDB.4.8/lib" sudo make (this could take hours) sudo make install 
And you are done, files is going to be in folder /uslocal/bin (DO NOT delete git created folder, because you are going to need it for faster compiling, when wallet get's and update.)
cd /uslocal/bin 
Now you can list files by:
ls 
And then you can copy/move them where ever you want by using:
sudo mv * [destination full path] 
Let it run and go back to folder where you move those files.
sudo chmod +x streamies-qt (since we want to run wallet) 
In most cases compiled files are going to in format of "shared library" so we need to create script to run it. Open up a text editor from gui or through nano. And paste this to that file:
#!/bin/bash ./streamies-qt 
And save it as a sh file, for example run.sh. Then we need to make it runnable so:
sudo chmod +x run.sh 
Now to run it, it's just:
./run.sh 
And here we are glorious GUI wallet appears and you are done, you can paste blockchain, wallet.dat from other sources, so this migration is pretty easy and you, if you have it on for exaple flash disk.
So this is basic how to compile QT wallets on AARCH64. I am running 7 wallets, 2 of those are Masternodes and RPI 4B 4GB would handle way more, I am at best on half of my RAM.
Some wallets need more package, but it's not much of and issue, since compiling stops and you just copy paste nape which is missing put it in the google and add "apt-get" after the name of package and you are going to see, what is the name of the packages so it can be retreived from package assinstant aka apt-get. So basically:
sudo apt-get install [package name] 
Then press y and again wrote:
sudo make 
This process is going to continue where it was left off, so nothing is going to run from beginning.
Updating wallets is basically exactly same, just repeat steps from "git clone" and after that proceed as it was written above.
So I hope this helps some of you, to use this at home and not on some VPS, if you are anxious as me, to host my wallets on remote server.
submitted by M1chlCZ to CryptoCurrency [link] [comments]

Groestlcoin 6th Anniversary Release

Introduction

Dear Groestlers, it goes without saying that 2020 has been a difficult time for millions of people worldwide. The groestlcoin team would like to take this opportunity to wish everyone our best to everyone coping with the direct and indirect effects of COVID-19. Let it bring out the best in us all and show that collectively, we can conquer anything.
The centralised banks and our national governments are facing unprecedented times with interest rates worldwide dropping to record lows in places. Rest assured that this can only strengthen the fundamentals of all decentralised cryptocurrencies and the vision that was seeded with Satoshi's Bitcoin whitepaper over 10 years ago. Despite everything that has been thrown at us this year, the show must go on and the team will still progress and advance to continue the momentum that we have developed over the past 6 years.
In addition to this, we'd like to remind you all that this is Groestlcoin's 6th Birthday release! In terms of price there have been some crazy highs and lows over the years (with highs of around $2.60 and lows of $0.000077!), but in terms of value– Groestlcoin just keeps getting more valuable! In these uncertain times, one thing remains clear – Groestlcoin will keep going and keep innovating regardless. On with what has been worked on and completed over the past few months.

UPDATED - Groestlcoin Core 2.18.2

This is a major release of Groestlcoin Core with many protocol level improvements and code optimizations, featuring the technical equivalent of Bitcoin v0.18.2 but with Groestlcoin-specific patches. On a general level, most of what is new is a new 'Groestlcoin-wallet' tool which is now distributed alongside Groestlcoin Core's other executables.
NOTE: The 'Account' API has been removed from this version which was typically used in some tip bots. Please ensure you check the release notes from 2.17.2 for details on replacing this functionality.

How to Upgrade?

Windows
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), then run the installer.
OSX
If you are running an older version, shut it down. Wait until it has completely shut down (which might take a few minutes for older versions), run the dmg and drag Groestlcoin Core to Applications.
Ubuntu
http://groestlcoin.org/forum/index.php?topic=441.0

Other Linux

http://groestlcoin.org/forum/index.php?topic=97.0

Download

Download the Windows Installer (64 bit) here
Download the Windows Installer (32 bit) here
Download the Windows binaries (64 bit) here
Download the Windows binaries (32 bit) here
Download the OSX Installer here
Download the OSX binaries here
Download the Linux binaries (64 bit) here
Download the Linux binaries (32 bit) here
Download the ARM Linux binaries (64 bit) here
Download the ARM Linux binaries (32 bit) here

Source

ALL NEW - Groestlcoin Moonshine iOS/Android Wallet

Built with React Native, Moonshine utilizes Electrum-GRS's JSON-RPC methods to interact with the Groestlcoin network.
GRS Moonshine's intended use is as a hot wallet. Meaning, your keys are only as safe as the device you install this wallet on. As with any hot wallet, please ensure that you keep only a small, responsible amount of Groestlcoin on it at any given time.

Features

Download

iOS
Android

Source

ALL NEW! – HODL GRS Android Wallet

HODL GRS connects directly to the Groestlcoin network using SPV mode and doesn't rely on servers that can be hacked or disabled.
HODL GRS utilizes AES hardware encryption, app sandboxing, and the latest security features to protect users from malware, browser security holes, and even physical theft. Private keys are stored only in the secure enclave of the user's phone, inaccessible to anyone other than the user.
Simplicity and ease-of-use is the core design principle of HODL GRS. A simple recovery phrase (which we call a Backup Recovery Key) is all that is needed to restore the user's wallet if they ever lose or replace their device. HODL GRS is deterministic, which means the user's balance and transaction history can be recovered just from the backup recovery